My check engine light and tcs light came on. I ran the obd2 code and it says cylinder 1 multi. misfire. located the prob. needed a coil pack. only changed the one on cylinder 1 also did all plugs. Lights went out all was well. I wanted to replace the rest of the coil packs thinking it would be smart. also when the first one was done the boot on the coil pack was stuck and had to dig it out. p.i.t.a. now I've changed all plugs and coils and it ran amazingly for 1 day! next day same lights came on. HELP! Anyone know where I went wrong?
I had my start button replaced. When I click the unlock button on my keyfob the rearview mirror light turns on and stays on when the car is running. I cannot get it to turn off. Does anyone know what this might be from? The rear view light turns off when the car is off. Thank you
Hi. I changed my clock spring in my 06 Nissan Murano. . After replacing the clock spring I took it for a ride. The car shudders and pulls when you turn it to the right or left and the slip light blinks. I discovered there was steering angle sensor on the back of the clock spring. I heard you have to bring the car to the dealer to recalibrate a steering angle sensor but that didn't work.I then found out that I had the wrong steering angle sensor installed. The new clock spring from eBay I got had a different sensor attached. So I bought the right steering angle sensor used on ebay for $60 since a new one is $800 which is crazy. So I installed it. The car still had the same problem. So I brought it to the dealership today so they could recalibrate it and it still didn't work This started as 20 min repair that is turning into a nightmare. Any suggestions??
So, I have a 2011 BMW 3 series 328i. My brake light came on a day after I got the car also my ABS is on and a triangle with a circle around it had came on well. Two or three days later, it all turned off and I assumed it was fine. I had hit 100 down a long stretched road (in which I could do in my 2004 Mercury Sable and not have this problem) and my engine light came on and then they all came back on. What does this mean? I don’t know much about a BMW but should I get it scanned or go to the dealership and have them look for it? This stresses me out considering I bought a car to run perfect not even a week ago and it’s not working properly like it should.
Hi I'm in the market for this one bmw I saw is a 2006 bmw 525i and the man said he'd do for me 1200 because the cars engine is no good and I am in Orlando Fl so I was wondering what are some of yall thoughts or opinions on it and where can I get a good bmw inspector to come out and look at it and estimate the cost of trying to bring the engine back to life or any of you guys diy's for bringing a engine back to life and btw the interior is in good shape and the exterior and I tried to start the car and it was completely dead I had to unlock the door manually and it also didn't have push button start but here's the vin(wbane53556ck84290) and help and suggestions would really help me out or anyone with a shop