In this article, we take a look at some of the best OBD2 scanners for Chrysler, Dodge, Jeep, Fiat vehicles.
Scanners that we cover here will allow you to diagnose multiple systems on your Dodge and Chrysler such as ABS, Airbag, Transmission, SRS.
Watch how to change the spark plugs and ignition coil on Dodge Durango vehicles with the 3.6L V6 engine.
For step-by-step instructions, torque specifications and tools needed lookup our guide on how to change Chrysler Pentastar Engine 3.6L V6 Spark Plugs.
In this guide, you will learn how to change the spark plugs on Dodge Challenger 3.6L six-cylinder engine. This how-to is applicable to Challengers equipped with the 6 cylinders 3.6L engine knows as Chrysler Pentastar engine.
For step-by-step instructions, tools needed and specifications look up our guide on Chrysler 3.6L V6 Pentastar Engine Spark Plug Replacement.
In this video, you will learn how to change the spark plugs and ignition coils on Dodge Avenger with the 3.6L V6 six-cylinder engine.
For more detailed step-by-step instructions and torque specifications look up our guide on Chrysler 3.6L Pentastar Engine Spark Plug Replacement.
To replace the spark plugs on a six-cylinder Avenger, you will need to remove the intake plenum. The process is straight forward once you watch the video that you will find in this article.
In this guide, you will find videos on how to change the Dodge key fob battery on various remote.
Scroll until you find the Dodge remote that matches yours. Note that the battery type used on each remote is different.
Dealership is closed for weekend but I see a flashing code? CAL on dash very small and between Direction and Temp It is just above word Vehicle. It flashes consistently but I have checked book and can not see that code and don't know how serious it is.
I noticed it when I drove the car today but picked it up yesterday but wasn't sure if it was there or not.
My 2012 Dodge Caravan is stalling while I'm driving, which is scary when it happen while I'm driving on the freeway. My screen where my speedometer is, turns black and I loose all power.. there is no check engine light or codes to go off of. Some things on the net are saying it's my ignition and others say it's my battery.. has anyone dealt with this before and if it is my switch how do I change it out? Thanks for the help